What's the toughest rubber track?

materthegreater said: Good thing they have a 2000 hour warranty. Click to expand... Make sure to read the warranty exclusions... If it were a CTL I wouldn't put new tracks on old sprockets. Been there, done that. On a typical mini ex I would be comfortable reversing the old sprockets if they weren't very worn. I have no experience with the Mecalac.

AMBMike said: Make sure to read the warranty exclusions... Click to expand... Great advice. Mater see if the 2K hour warranty requires new sprockets at install in the fine print. I'd be interested in what is says.

CM1995 said: Great advice. Mater see if the 2K hour warranty requires new sprockets at install in the fine print. I'd be interested in what is says. Click to expand... I specifically asked the salesman two different times if I needed to replace the sprockets and he said only if the teeth are worn to a point. That being said, he didn't provide me with a copy of the warranty documents...

CM1995 said: Great advice. Mater see if the 2K hour warranty requires new sprockets at install in the fine print. I'd be interested in what is says. Click to expand... Also, it may only be 1500 hours I can't remember for sure except I know he said 24 months. I've put about 700 hours on the machine in the past 2 years so I'm sure I won't meet the hour limit anyway.

The salesman told me I didn't need sprockets either

Acoals said: The salesman told me I didn't need sprockets either Click to expand... Like a real estate agent will say - "Nothing will ever be built behind the house you are looking at"..

CM1995 said: What size/type machine? Click to expand... tb290

We will see how they hold up

What do they define as "manufacturers defects"?

CM1995 said: What do they define as "manufacturers defects"? Click to expand... A good question that I hope to never have to ask them