Dynalift D4P80 Boom cable fix

wow- thank you!

trying to get info on the dana spicer axles used in an early model TCI D4P60 telehandler, need to replace the bearings that are in the top and bottom plates on the ends of the axles at the wheels. 53176 is the model number on the tag but that does not seem to pull anything up online.

JNewton said: wow- thank you! Click to expand... It is not much but information is limited .That is why I grab up any manuals paper or pdf for all kinds of machines.

Can you send me a copy of that manual for the D4P80 please? My email is [email protected]

Hello Tool_KIng, I am new on this forum. I bought a d4p80 at an online auction. Big Mistake, I don't know much on these machines, but I now have a 20,000 project. Everything leaks and the it can't lift more than 2,000 lbs. I would really appreciate any manuals and maybe where I can find parts for this beast. Thank you so much in advance.

Sorry Tool King, I just noticed I didn't give you my email address. It's [email protected] Thank you in advance!

I just acquired a TCI D4P80 mdl 544A and I have a bad steering kingpin bearing. Does anyone happen to have a part number or source? Also in need of a seal kit for the main (long) lift cylinders. Thanks!

Anyone out there have manuals for the TCI D4P80?

ArcticMan said: I just acquired a TCI D4P80 mdl 544A and I have a bad steering kingpin bearing. Does anyone happen to have a part number or source? Also in need of a seal kit for the main (long) lift cylinders. Thanks! Click to expand... I can send you what I have for manuals. I have a seperate axle parts manual and service manual. I’d recommend getting the bearing numbers off the cup/cone instead of OEM part numbers. For the lift cylinders I’d recommend taking it apart and bring all the parts to a reputable hydraulic shop. They should be able to make you a seal kit from the old parts. I had to do this with the 4 steering cylinders. Depending on how much you trust yourself you can download the Hercules seal catalog and get the part numbers that way but in my experience it only saves a little bit of time. Send me your email and I’ll send what I have for manuals

Thanks a bunch Jon, my email is [email protected] I’ll see what I can find for hydraulic shops.

I rebuild my cylinder, there was a tag on the cylinder, GBI and a #, Great Bend Industries, they are still in business and I was able to get a part number and order the seal kit. You could also follow the earlier post and take the seals to a hydraulic shop and they can match them up. There are some hydraulic seal companies that you can order online if you can figure out what seals you need. Best of luck!

Thanks, I’ll look for a tag on the cylinder.

Ebert said: Hi Tool king, would you be able to send me to a manual for a dyna lift d4p60? Thanks!! [email protected] Click to expand... Could you send me a copy of the manual also? [email protected]

One more request for manual(s) Please: [email protected] Thank you!

tool_king said: I might have some books on in pdf form.I will take a look. Thanks Click to expand... Tool_king, Would you still happen to have the service manual on the 1994 DYNALIFT d4p80 machine? My email is [email protected] .​ Thanks Rob

Toolking - if you're still out there, your help is greatly appreciated for the D4P80 manuals. [email protected]

dchurch said: Toolking - if you're still out there, your help is greatly appreciated for the D4P80 manuals. [email protected] Click to expand... Will send when I get home .

dchurch said: Toolking - if you're still out there, your help is greatly appreciated for the D4P80 manuals. [email protected] Click to expand... Emailed

tool_king said: Emailed Click to expand... Hi tool_king, could you also send me the manuals yoi have on the d4p80. Got one and jave it mostly working but would be great to have manuals. Thanks so much. My email is [email protected]

tool_king said: Emailed Click to expand... Tool_King I could also use your help if you have the DynaLift D4P80 manual, [email protected] . Much appreciated.