Generac Kia Diesel Engine Identification?

I have a Generac 2.4L Kia Diesel Genset and I am having a hard time finding parts for it. Since it is a Kia engine, I was hoping that I could figure out what Model of the Kia engine it is and be able to find the parts with Kia part numbers vs the Generac part numbers. I am attaching the numbers I found stamped into the block. Any help would be great. Thanks!

If it has a mechanical injection pump and injectors, snap a pic of them and any name plates u see on the inj pumps.. DO NOT SCRAPE THEM

thepumpguysc said: If it has a mechanical injection pump and injectors, snap a pic of them and any name plates u see on the inj pumps.. DO NOT SCRAPE THEM Click to expand... Scrape ? or scrap ? Is there something about the name plates ? or the pumps themselves ?

If I can ID the pump, I can look to see what engine it was assigned to.. And isn’t that what your asking for.?? The name plates r stamped lightly, so if u start scraping it, you’ll scratch off the numbers.. & that’s no bueno..

They seemingly used engines not used in any car or tractor in the US. Or custom configurations not used anywhere else in the world. But I have seen TPG pull some rabbits out of the hat.

After doing a bit of research myself, it looks very similar to the engine in a Kia K2400 or a Kia Ceres. Not something in the US, so maybe? I went out to take some pictures for you guys tonight and found a Dataplate that Generac painted over. I tried very lightly to remove the paint, but I ended up taking off too much so I stopped. See the images below as well as a picture of the engine pump. Looks like a DOOWON pump? Just to give you more of a back story, I bought this Genset and it sat in storage for about 7 years before I tried to use it. It had 10 hours on it from the factory and I ran it for about 30 Minutes before it started making a strange sound. I of course did a full Oil change before I ran it after sitting this long. About 30 seconds into it making a strange sound the engine shut down. I pulled the head and found that the exhaust valve dropped into one of the cylinders and caused one of the cylinders to break apart. The cylinder walls seem undamaged though so I think I got lucky. This was about 7 years ago. At the time I ordered all the parts I needed to fix the engine. I got busy and forgot about it. When I checked the parts I ordered, I found that they had only shipped half of them and that the company went bankrupt and kept my money. Ugh. I finally have time for this and now all the parts are discontinued that I need. I am trying to find a piston, connecting rod, rod bearings, a valve, valve springs, and valve cotter pins. Thanks for the help.

I thought I had the service manual for that engine and your pictures confirm it's the right one (sadly not the parts manual). For the IP it says "Diesel Kiki's Bosch-VE-Distributor Type". I looked through the manual and there's no hints on the actual manufacturer. Generac was pretty bad about picking oddball industrial engines to use for a run and just list it as a Generac in the literature.

I did buy the service manual for it as well, but it never says the make and model of the original engine. I tried those numbers I was able to lift off the data plate and did not really find anything online.

U need to go to the store and get some paint/gasket remover in a spray can.. spray it on and wipe it off.. NO SCRATCHING.!!! MP is correct.. it’s a VE pump. There IS a data tag on the pump.. Get those #

There is no way on earth this orphan is worth all that trouble, but if you want to do it just because it is a fun project, by all means I am interested in how this turns out. After you gave this additional info about it being a 7 year basket case.

thepumpguysc said: U need to go to the store and get some paint/gasket remover in a spray can.. spray it on and wipe it off.. NO SCRATCHING.!!! MP is correct.. it’s a VE pump. There IS a data tag on the pump.. Get those # Click to expand... So I used paint remover on the top plate and that's what pulled the numbers off too. So I am worried it will pull the numbers off this data-late too.

Birken Vogt said: There is no way on earth this orphan is worth all that trouble, but if you want to do it just because it is a fun project, by all means I am interested in how this turns out. After you gave this additional info about it being a 7 year basket case. Click to expand... This is pretty much a new Genset, so I would like to recover it if possible. Everything else on this unit is pretty much brand new. And for the 30 minutes it ran, it was glorious Perhaps I am over thinking it? I have not done a full engine rebuild before. Could some of these things like valve springs, valves, and rod bearings be a standard size that I could use a same size OEM part? I will be posting a video about this on my channel once I can find some parts for this if you want to follow along.

thepumpguysc said: If I can ID the pump, I can look to see what engine it was assigned to.. And isn’t that what your asking for.?? The name plates r stamped lightly, so if u start scraping it, you’ll scratch off the numbers.. & that’s no bueno.. Click to expand... Hello Sir, I am dealing with the same issue, bought at an auction taken apart, I attached all possible engine identifiers. Any help would be greatly appreciated I found the part manual but I am more interested in finding a service manual. Thank you in advance!

Makers Acres said: I have a Generac 2.4L Kia Diesel Genset and I am having a hard time finding parts for it. Since it is a Kia engine, I was hoping that I could figure out what Model of the Kia engine it is and be able to find the parts with Kia part numbers vs the Generac part numbers. I am attaching the numbers I found stamped into the block. Any help would be great. Thanks! View attachment 249971 View attachment 249972 Click to expand... Here is the part manual. Generac 2.4L Diesel Generator Kia 96954 Parts Manual PB24000D Generac 2.4L Diesel Generator Kia 96954 Parts Manual PB24000D issuu.com

104749-7000 is the inj pump part #..(Zexel) WRITE THAT DOWN IN YOUR MANUALS.. That sticker WILL rub off so keep that # protected..

Makers Acres said: I have a Generac 2.4L Kia Diesel Genset and I am having a hard time finding parts for it. Since it is a Kia engine, I was hoping that I could figure out what Model of the Kia engine it is and be able to find the parts with Kia part numbers vs the Generac part numbers. I am attaching the numbers I found stamped into the block. Any help would be great. Thanks! View attachment 249971 View attachment 249972 Click to expand... Generac Generator - Engine Parts for Heavy Equipment New Engine Parts for Generac Generators Diesel & Water Cooled Gas Engine Parts Located in USA Parts delivery in USA including Hawaii & Alaska Canada & Worldwide www.heavyequipmentrestorationparts.com

thepumpguysc said: 104749-7000 is the inj pump part #..(Zexel) WRITE THAT DOWN IN YOUR MANUALS.. That sticker WILL rub off so keep that # protected.. Click to expand... Thank you!

I do have a service manual for this engine too.

Makers Acres said: I do have a service manual for this engine too. Click to expand... Is there anyway you would share this with me?!

Makers Acres said: I do have a service manual for this engine too. Click to expand... Makers Acres said: This is pretty much a new Genset, so I would like to recover it if possible. Everything else on this unit is pretty much brand new. And for the 30 minutes it ran, it was glorious Perhaps I am over thinking it? I have not done a full engine rebuild before. Could some of these things like valve springs, valves, and rod bearings be a standard size that I could use a same size OEM part? I will be posting a video about this on my channel once I can find some parts for this if you want to follow along. Click to expand... I went looking for a video on your channel and didn't find anything about your unit. Did you do a rebuild or something?