Hi guys, I have a Terex/Genie Girolift 5022 roto telehanlder (2003) Problem is the machine has no Danfoss control module (brain) for the hydraulic system > the way I bought the machine (not sure what happened with the previous owner) But I have no hydraulic functions on the joysticks or jack legs etc As far as I can see the machine/parts are mainly discontinued including this control module. Does any of you guys know of a machine which is for parts ? Or know where I could look for them or who would be a good starting point as the information is very limited online and there seems to be no machines anywhere for breaking! Has to be some Terex/Genie gurus on here!!! Thanks
Terex/Genie Girolift 5022 HELP!!!
Started by Crusherman10 replies
CrushermanNew Member#1 mechanikmiroNew Member#2 is it definitely a module? was there an attempt to repair it?? mechamikmiro...gmail.com
CrushermanNew Member#3 mechanikmiro said: is it definitely a module? was there an attempt to repair it?? mechamikmiro...gmail.com Click to expand... Yes it is a brain like module I’m certain, the two joysticks link into it. do you know of one available? I’ve attached a few photos so you can see
Dieseldave10New Member#4 Crusherman said: Yes it is a brain like module I’m certain, the two joysticks link into it. do you know of one available? I’ve attached a few photos so you can see Click to expand... That'd be a handy machine if you got it sorted, the problem being most of the parts are discontinued for them. Whats the rest of it like?
CrushermanNew Member#5 Dieseldave10 said: That'd be a handy machine if you got it sorted, the problem being most of the parts are discontinued for them. Whats the rest of it like? Click to expand... Been stood a few years, but only 700 Hours on it. Pity it needs a paint job and ram rods redone
Dieseldave10New Member#6 Crusherman said: Been stood a few years, but only 700 Hours on it. Pity it needs a paint job and ram rods redone Click to expand... Yes you could spend alot on it to get it wright, it must've been stood by the coast/sea all its life? What was the story with the module missing?
CrushermanNew Member#7 Dieseldave10 said: Yes you could spend alot on it to get it wright, it must've been stood by the coast/sea all its life? What was the story with the module missing? Click to expand... I haven’t a notion bought it with a joystick issue but there was an ECU missing unfort. Going to go down the route of installing different joysticks in it
Dieseldave10New Member#8 Crusherman said: I haven’t a notion bought it with a joystick issue but there was an ECU missing unfort. Going to go down the route of installing different joysticks in it Click to expand... That might be the best idea, if you're ever thinking on selling i might be interested.
CrushermanNew Member#9 Dieseldave10 said: That might be the best idea, if you're ever thinking on selling i might be interested. Click to expand... Where you based?
Dieseldave10New Member#10 Crusherman said: Where you based? Click to expand... Northern ireland up.near north coast, I see it has Galway registration.
CrushermanNew Member#11 Dieseldave10 said: Northern ireland up.near north coast, I see it has Galway registration. Click to expand... I’m Armagh. I might be interested in selling the way it sits. Comes with a winch bucket and forks and remote control