Dead John Deere 855

CJSuhr · 2024-09-28T03:17:59.000Z

Looking at getting an older 80s JD 855 track loader. Has anyone been around these machines enough to know much about them? Need to get it turned 90 degrees and loaded onto a detach lowboy. Can I pull the planetary covers off the back and get the machine to freewheel enough to turn 90 degrees and pull onto a trailer? This loader has been sitting at least 5 years. What size machine do I need to try to move this with? Wreckers are expensive so trying to do this cheaper than what I was quoted. Would a large 4wd tractor do it? Or do I need another tracked machine like a track loader, dozer, or excavator?

Started by CJSuhrSep 28, 202465 replies

NC_JD855New MemberOct 2, 2026#61
just updating on my 855. we just finished repacking the bucket cylinders and replacing hoses. The boom cylinders appear to be a pain in the ass to get to. From the service manual it looks like we need remove the rear idler/carrier. Both drive motors do engage, however I don’t get much reaction when depressing the right steering pedal, especially at lower speeds. I’m hopeful it’s just do to it being super low on fluid. We’re replacing filters and topping off fluid this weekend. Hour meter is still working, so I may have the lowest hour 855 at 1200
Welder DaveExpertOct 2, 2026#62
Depends on the hour meter. It might have gone around once and it's 11,200 hours.
NC_JD855New MemberOct 3, 2026#63
Welder Dave said: Depends on the hour meter. It might have gone around once and it's 11,200 hours. Click to expand...
NC_JD855New MemberOct 3, 2026#64
fingers crossed I’ve got a unicorn!
Deere500aSenior MemberOct 4, 2026#65
Right on NC 855 would be a fun loader to spend a day on.
Welder DaveExpertOct 4, 2026#66
I'd expect it has more than 1196 hours. Maybe hour meter didn't work or was changed. 1196 hours the machine should be like new. It could still be a good machine though.

Reply