Anyone seen one? Whats is this bearing called?
Can someone identify this bearing?
Started by ps66x445 replies
ps66x4Junior Member#1 funwithfuelSenior Member#2 Thats looks like 2 double roller bearings on a common shaft.
ps66x4Junior Member#3 This is it apart.
ps66x4Junior Member#4 I looked everywhere on the net and can't find one.
funwithfuelSenior Member#5 No numbers on the dirt seals?
funwithfuelSenior Member#6 What are you working on? Looks like you're going to have to comb through the SKF catalog with ID, OD and length. That center groove is misleading
ps66x4Junior Member#7 Picture of what's left of the seal.
ps66x4Junior Member#8 Working on a concrete screed
funwithfuelSenior Member#9 https://www.skf.com/us Plug in your dimensions and see what pops up. Wish I could have helped more
Tyler d4cSenior Member#10 Looks alot like a deere water pump bearing
BoothealNew Member#11 This was my first thought - an agricultural gauge wheel bearing. Our old cultivators used a version of this. Sorry for the poor quality of pic - I don’t cut and paste as well as some! this particular one is from Shoup Catalog.
BoothealNew Member#12 shoupparts.com/SH25036-Double-Stem-Bearing
ps66x4Junior Member#13 Bootheal said: shoupparts.com/SH25036-Double-Stem-Bearing[/QUOTE Looks close, if only it had thr same dimensions Click to expand...
ps66x4Junior Member#14 I found that it's called a "integral shaft bearing". Now I have to find one with the right dimensions. I think I'll have to get a machine shop to cut the shaft and put in a hexagon hole for the drive shaft.
TinkererSenior Member#15 Wouldn't the bearing be listed in the parts book or owner's manual of the screed ?
kshansenSenior Member#16 Tyler d4c said: Looks alot like a deere water pump bearing Click to expand... I was thinking along the same line, seems some old in-line 71 Detroits used a set-up like that in their water pumps! Found this site with dimensions and cross-overs to other brands: https://www.imbbearing.com/integral-shaft-bearings.html And just one more link that may have more: http://peakbearings.com/catalog/WaterPumpBearings.pdf
ps66x4Junior Member#17 I found something close in Peak bearings but not a match. I couldn't log on to imbbearings. And Toro 103119 spindle bearings are a close match. Got to keep looking.
ps66x4Junior Member#18 Tha shaft is 3.750 long, 0.745 diameter The outer race is 2.125 long 1.5 diameter
Tyler d4cSenior Member#19 kshansen said: I was thinking along the same line, seems some old in-line 71 Detroits used a set-up like that in their water pumps! Found this site with dimensions and cross-overs to other brands: https://www.imbbearing.com/integral-shaft-bearings.html And just one more link that may have more: http://peakbearings.com/catalog/WaterPumpBearings.pdf Click to expand... The 53 series did also
heymccallSenior Member#20 I dont see the screed manufacturer name or model number in this thread